Auto-page EXP-52 User Manual

EXP-52 OPERATION INSTRUCTIONS THIS PRODUCT IS DESIGNED FOR PROFESSIONAL INSTALLATION ONLY!!

EXP-52 8 1. Flip the VALET/OVERRIDE switch to "ON" position. 2. Turn the ignition switch to "ON", then "OFF", the

EXP-52 9 To code the EXP-52 transmitters for two or three vehicles follow the diagrams as shown below. Before multiple vehicle programming can be ach

A.P.I.

Congratulations on your purchase of the EXP-52 vehicle security system. Please take the time to read over this operation manual to thoroughly famili

EXP-52 1 EXP-52 OPERATION INSTRUCTIONS A. REMOTE CONTROL TRANSMITTER OPERATION The new remote control transmitter (XT-54) included with the EXP-

EXP-52 2 3. PANIC FUNCTION The EXP-52 remote control may be used as a remote panic switch to trigger the siren in cases of emergency. To activate

EXP-52 3 6. OPTIONAL ACCESSORY OPERATION Simultaneously pressing both the ON/OFF and AUX buttons will allow third channel operation. A negative pu

EXP-52 4 B. LED STATUS INDICATOR OPERATION 1. LED OFF= The EXP-52 is disarmed. 2. LED CONSTANT ON= Indicates open trigger circuit. 3. LED FAST

EXP-52 5 (siren will sound); switch the vehicle ignition to ON. Move the VALET/OVERRIDE switch to ON; then OFF; the siren will stop. The EXP-52 wil

EXP-52 6 2. The LED STATUS INDICATOR will begin fast flashing and the passive arming timer will begin counting down. 3. If you re-open the exit,

EXP-52 7 This feature is optional at time of installation. I. TRIGGER TEST After arming the EXP-52 in either the PASSIVE or MANUAL mode, test t