Auto Page RF-505 Instruction Manual download pdf (Page 11)

REVIEWING SET POINT TEMPERATURE

You can view the set point temperature

at any time by pressing either the UP or

DOWN key.

When any programme is running, the

LCD display will show the programme set

point temperature with the SET indicator

displayed:

When operating in Frost Protection

mode, the LCD display will show a

reading of 5 °C and also display the Frost

Protection indicator:

When operating in Temporary Override

mode, the LCD display will show the

temporary set point temperature:

To exit from the set point review, press any key except the UP or DOWN

keys, or don’t press any keys for approximately four seconds – either of

these actions will return the RT505TX to Normal mode.

TEMPORARY OVERRIDE

It is possible to temporarily override the current set temperature of the

RT505TX. There are two ways to do this:

•

While reviewing set point temperature: Pressing the UP or DOWN key

while reviewing the set point temperature will increase or decrease

the set point temperature in 0.5 °C steps.

•

In Normal mode: press and hold either the UP or DOWN key to display

the set point temperature. After two seconds, the RT505TX will enter

Temporary Override mode and allow increase or decrease of the set

point temperature. If the key is released within two seconds then you

will only be able to review the set point temperature.

RT505TX INSTRUCTION MANUAL

Salus RT505TX Manual 011_89 04/09/2012 08:59 Page 11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

No comments

Auto Page RF-505 Instruction Manual Page 11